HP requirement is related to type and volume of straw, how fine the cut is, as well as moisture conditions. As a result it will vary continually. On any given day ...

The MAV chopper can spread as narrow as 20-25 feet. To accomplish this the tailboard should be lowered considerably. Under ideal conditions the chopper will spread 42 feet. To accomplish this, ...

It varies drastically due to cutting conditions, crop conditions, soil types, etc.. The typical life of a heat treated blade is approximately 350 hours. The carbide coated blade has a life ...

No, by replacing ALL the blades the rotor should be fully balanced.

Yes, all MAV complete choppers spread the straw with the chaff unless noted as "Straw Only" Spreading the chaff with the straw is accomplished by adding an extension to the ...

Yes, it can be done. There are some modifications that must be done on the MAV series choppers to accomplish this. The Redekop Option: Feed Spout must be mounted on your ...

No, you must have a Redekop Chopper or a Redekop Upgrade Rotor to use the Redekop chopper blades.

Redekop’s MAV technology cuts through flax without a problem. However blades will wear faster in flax. Carbide blades are recommended because they keep a sharpened edge even when slightly ...

In corn the chopper must run at a slower speed using a slow speed drive kit (Listed under "Available Options"). The stationary blades must be pulled out of the chopper housing ...